Welding Processes & Technical Filler Metal Resources
Engineering guidelines for GTAW (TIG) and GMAW (MIG) filler metal selection, wire diameter sizing, base metal dilution control, interpass temperature limits and international AWS/ISO welding standards.
GTAW (TIG) & GMAW (MIG) Filler Wire Configurations
Not every alloy grade or product form is suitable for every welding process. Joint configuration, wall thickness, welding position and alloy solidification behaviour govern process selection.
Gas Tungsten Arc Welding (GTAW / TIG — ISO 141)
Product Form: Straight cut-length filler rods (standard 914mm / 36-inch or 1000mm lengths) supplied in tubular packs with grade identification.
Metallurgical Role: Preferred for root passes in single-sided process piping, thin-wall heat exchanger tubing, cryogenic vessels and reactive or high-nickel alloys (Inconel 625, Hastelloy C276, Cupro Nickel 70/30) where independent control of heat input and filler metal addition prevents root burn-through and limits base metal dilution.
Shielding Gas: High-purity Argon (99.995%+) or Argon-Helium mixtures for deeper penetration on thick nickel and copper-nickel sections, with pure Argon back-purging on stainless and nickel root runs.
Gas Metal Arc Welding (GMAW / MIG — ISO 131)
Product Form: Precision layer-wound continuous wire on BS300, S200 or S100 spools with controlled cast and helix for smooth wire feeding.
Metallurgical Role: Engineered for high-deposition fill and cap passes on structural stainless steel (ER308L, ER316L, ER308LSi, ER316LSi), vessel cladding (ER309L, ERNiCrMo-3) and heavy shop fabrication using short-circuiting, pulsed-spray or axial-spray transfer.
Shielding Gas: Ar + 1–2% O2 or Ar + 2–2.5% CO2 for austenitic stainless steels; Ar + He (+ trace CO2 where qualified) for pulsed GMAW on nickel-base filler metals.
Wire Diameter Selection & Base Metal Thickness Guide
Selecting the correct wire diameter balances arc stability, penetration profile and heat input (kJ/mm) across stainless steel, nickel alloy and copper-nickel welds.
| Metric Diameter | Imperial Equivalent | Primary Welding Process | Typical Base Metal Thickness | Standard Supply Form & Packaging |
|---|---|---|---|---|
| 0.8 mm | .030" | GMAW (MIG — Short Arc / Pulsed) | 1.0 mm – 3.0 mm sheet & light gauge | 5 kg / 12.5 kg / 15 kg Layer-Wound Spools |
| 0.9 mm | .035" | GMAW (MIG — Short Arc / Pulsed) | 2.0 mm – 5.0 mm sheet, ducting & light pipe | 12.5 kg / 15 kg Layer-Wound Spools (BS300) |
| 1.2 mm | .045" | GMAW (MIG — Pulsed / Spray) & GTAW | 4.0 mm – 12.0 mm plate, vessels & overlays | 12.5 kg / 15 kg Spools or 914mm / 1000mm TIG Rods |
| 1.6 mm | 1/16" | GTAW (TIG Root/Fill) & GMAW Spray | 2.0 mm – 6.0 mm pipe root & thin-wall vessels | 5 kg / 10 kg Tubular Packs (914mm / 1000mm) or Spools |
| 2.0 mm | 5/64" | GTAW (TIG Manual Root & Fill Passes) | 3.0 mm – 8.0 mm process piping & tubesheets | 5 kg / 10 kg Plastic Tubes (914mm / 1000mm) |
| 2.4 mm | 3/32" | GTAW (TIG Standard Pipe & Vessel) | 5.0 mm – 16.0 mm pressure piping & manifolds | 5 kg / 10 kg Plastic Tubes (914mm / 1000mm) |
| 3.2 mm | 1/8" | GTAW (TIG Heavy Wall Fill) & SAW | > 10.0 mm heavy wall pipe, flanges &forgings | 5 kg / 10 kg Plastic Tubes or 25 kg SAW Coils |
Base Metal Compatibility, Dilution, Preheat & Interpass Temperature Rules
Austenitic Stainless Steels (300 Series)
Ferrite Control: Standard grades (ER308L, ER316L, ER309L) are balanced to solidify in the primary ferritic-austenitic mode (typically 3–10 FN) to prevent solidification cracking.
Preheat & Interpass: Do not preheat austenitic stainless steels (except to remove moisture above 15°C). Maintain interpass temperature below 150°C (300°F) to prevent chromium carbide sensitization and sigma-phase embrittlement.
Nickel & High-Temp Alloys (Inconel / Hastelloy)
Cleanliness & Oxide Removal: Nickel weld pools are sluggish and do not wet out like carbon steel. Joint bevels and 25 mm adjacent surfaces must be ground bright and degreased to eliminate sulfur, phosphorus, lead or paint contamination.
Preheat & Interpass: Preheat is not required. For Hastelloy C276, Hastelloy C22 and Alloy 20, restrict maximum interpass temperature to 95°C – 120°C to prevent intermetallic precipitation in the HAZ.
Martensitic & Dissimilar Joints
Martensitic Grades (ER410 / ER410NiMo): Unlike austenitic grades, 410 stainless steel air-hardens and requires controlled preheating (150°C – 260°C) and Post-Weld Heat Treatment (PWHT) to prevent hydrogen-assisted cold cracking.
Dissimilar Carbon-to-Stainless: Use over-alloyed ER309L or nickel-base Inconel 82 (ERNiCr-3) / Inconel 625 (ERNiCrMo-3); apply preheat only to the carbon/low-alloy steel side when dictated by wall thickness and carbon equivalent.
| Standard Code | Specification Title | Covered FillerWires Product Categories |
|---|---|---|
| AWS A5.9 / ASME SFA-5.9 | Specification for Bare Stainless Steel Welding Electrodes and Rods | Stainless Steel Filler Wires (ER308L, ER316L, ER309L, ER310, ER347, ER317L, ER385/904L) & Alloy 20 (ER320/ER320LR) |
| AWS A5.14 / ASME SFA-5.14 | Specification for Nickel and Nickel-Alloy Bare Welding Electrodes and Rods | Nickel Alloy Filler Wires (ERNiCrMo-3, ERNiCr-3, ERNiCrCoMo-1, ERNiFeCr-1, ERNiCrMo-4, ERNiCrMo-10, ERNiCu-7) |
| AWS A5.7 / ASME SFA-5.7 | Specification for Copper and Copper-Alloy Bare Welding Rods and Electrodes | Copper Nickel Filler Wires (ERCuNi 70/30 & CuNi 90/10) |
| EN ISO 14343 | Welding consumables — Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels | European classification equivalents for stainless steel TIG and MIG filler wires |
| EN ISO 18274 | Welding consumables — Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys | European classification equivalents for Inconel, Hastelloy, Monel and pure nickel wires |
Geographic Relevance: Welding Technologies, Industrial Sectors & Target Export Markets
Different industrial hubs prioritize specific welding processes and filler metal specifications based on regional infrastructure projects:
| Welding Technology & Application | Primary Filler Metal Grades | Target Country | Representative Industrial Cities & Hubs |
|---|---|---|---|
| Automated GMAW / Pulsed MIG Weld Overlay Cladding (Sour Oil & Gas Subsea Trees, Risers, Valves) | Inconel 625 (ERNiCrMo-3), Inconel 82 (ERNiCr-3), ER309L | UAE, Saudi Arabia, Qatar, USA, UK | Abu Dhabi, Dubai, Jebel Ali, Dammam, Jubail, Doha, Ras Laffan, Houston, Aberdeen |
| GTAW (TIG) Root & Fill Seawater Piping (MSF/RO Desalination, Offshore Cooling, Shipbuilding) | Cupro Nickel 70/30 (ERCuNi), Cupro Nickel 90/10, Monel 400 | Oman, UAE, Bahrain, Singapore, Italy | Muscat, Sohar, Duqm, Sharjah, Fujairah, Manama, Hidd, Jurong, Tuas, Genoa, Trieste |
| High-Purity GTAW & Pulsed MIG Chemical Vessel Fabrication (Acid Reactors, Scrubbers, Fertilizers) | Hastelloy C276, Hastelloy C22, Alloy 20, ER316L | Saudi Arabia, Kuwait, Germany, South Africa, Peru | Jubail, Yanbu, Ahmadi, Shuaiba, Hamburg, Düsseldorf, Frankfurt, Johannesburg, Durban, Lima, Callao |
| High-Temperature GTAW/GMAW Furnace & Reformer Welding (Ethylene Crackers, Power Boilers) | Inconel 617, ER310, Inconel 82 | Qatar, UAE, Netherlands, Italy, Sri Lanka | Mesaieed, Ruwais/Abu Dhabi, Rotterdam, Eindhoven, Milan, Turin, Colombo, Trincomalee |
Frequently Asked Questions — Welding Processes & Standards
Common engineering questions on GTAW (TIG), GMAW (MIG), interpass temperature control and dissimilar welding.
GTAW (TIG) cut-length rods (914mm / 1000mm) are preferred for single-sided pipe root passes, thin-wall tubing, cryogenic joints and high-nickel or copper-nickel alloys where precise control of heat input and base-metal dilution is essential. GMAW (MIG) spooled wires (0.8mm–1.6mm) are selected for higher-deposition fill passes, structural fabrication and automated weld overlay cladding.
Austenitic stainless steels (such as ER308L, ER316L, ER309L) should be welded without preheating and with a maximum interpass temperature of 150°C (300°F). Corrosion-resistant nickel-molybdenum alloys (Hastelloy C276, Hastelloy C22) and Alloy 20 require even stricter interpass control below 95°C–120°C using narrow stringer beads.
Above 315°C–425°C or when Post-Weld Heat Treatment (PWHT) is required, carbon migrates out of ferritic Cr-Mo steel into stainless ER309L weld metal and thermal expansion mismatch causes cyclic fatigue. Nickel-base ERNiCr-3 (Inconel 82) stops carbon diffusion and matches the thermal expansion coefficient of ferritic boiler steels.