International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Hastelloy C22 Filler Wire Supplier — AWS A5.14 ERNiCrMo-10 Welding Wire

High-chromium Nickel-Chromium-Molybdenum-Tungsten filler wire (AWS A5.14 ERNiCrMo-10 / UNS N06022) offering superior resistance to oxidizing and reducing acid streams, wet chlorine and localized crevice attack.

AWS A5.14 ERNiCrMo-10 UNS: UNS N06022 Werkstoff: 2.4602 GTAW (TIG), GMAW (Pulsed / Spray MIG)
Hastelloy C22 AWS A5.14 ERNiCrMo-10 welding filler wire
Hastelloy C22 (AWS A5.14 ERNiCrMo-10) TIG rods and MIG spooled welding consumables.
Nickel Alloy Filler Wires

Optimized Cr-Mo-W Balance (ERNiCrMo-10) for Mixed Oxidizing & Reducing Acid Streams

Hastelloy C22 Filler Wire (AWS A5.14 ERNiCrMo-10 / Alloy C22 Filler Metal) is an advanced nickel-chromium-molybdenum-tungsten consumable formulated with higher chromium (20.0–22.5% Cr) than C276 alongside 12.5–14.5% Mo and 2.5–3.5% W. This precise metallurgical balance provides superior resistance to oxidizing aqueous media (such as nitric acid, ferric and cupric chlorides, and wet chlorine) while retaining exceptional resistance to reducing acids.

Because molybdenum and tungsten segregate in dendritic weld metal during solidification, ERNiCrMo-10 (C22) is frequently specified not only for welding Alloy C22 base metal, but also as an over-matching filler metal for welding C276, Alloy 625 and 6% Mo super-austenitic stainless steels where maximum weld-zone pitting and crevice corrosion resistance is required.

AWS Classification AWS A5.14 ERNiCrMo-10
EN / ISO Classification EN ISO 18274 S Ni 6022 (NiCr21Mo13Fe4W3)
UNS / Werkstoff Nr. UNS N06022 / 2.4602
Welding Processes GTAW (TIG), GMAW (Pulsed / Spray MIG)

Alloy Identification, Standards & Supply Specifications

Ultra-low carbon (≤0.015% C) and silicon (≤0.08% Si) inhibit grain-boundary precipitation during welding, maintaining corrosion resistance in the as-welded condition.

Technical Product Specification Summary — Hastelloy C22 Filler Wire
Product Designation Hastelloy C22 Filler Wire (TIG Welding Rod / MIG Spooled Wire)
AWS / ASME Classification AWS A5.14 ERNiCrMo-10
EN / ISO Classification EN ISO 18274 S Ni 6022 (NiCr21Mo13Fe4W3)
UNS Designation & Werkstoff Nr. UNS N06022 • W.Nr. 2.4602
Compatible Base Materials Hastelloy C22 (UNS N06022 / W.Nr. 2.4602), Hastelloy C276 (N10276), Alloy 625 (N06625), 6% Mo super-austenitic stainless steels (254 SMO, AL-6XN), and corrosion-resistant weld overlays on carbon and low-alloy steel.
Supported Welding Processes GTAW (TIG), GMAW (Pulsed / Spray MIG)
Shielding Gas Recommendations 100% Argon (GTAW); Argon + Helium (Pulsed GMAW)
Available Wire Diameters MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16")
TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm
Packaging & Storage TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons.
MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film.
Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging.

Chemical Composition Specification (AWS A5.14 ERNiCrMo-10)

The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:

Chemical Composition Limits — Hastelloy C22 Filler Wire
Element Verified Specification Limit (wt.%) Metallurgical Function in Weld Metal
Nickel (Ni) Remainder (~56%) Austenitic nickel matrix immune to chloride SCC
Chromium (Cr) 20.0 – 22.5 High chromium provides superior resistance to oxidizing acid chlorides
Molybdenum (Mo) 12.5 – 14.5 High resistance to reducing acids and localized pitting
Tungsten (W) 2.5 – 3.5 Enhances crevice corrosion resistance in hot chloride brines
Iron (Fe) 2.0 – 6.0 Controlled iron balance
Cobalt (Co) 2.5 max Solid-solution element
Carbon (C) 0.015 max Extra-low carbon eliminates carbide sensitization in weld HAZ
Silicon (Si) 0.08 max Extra-low silicon prevents intermetallic phase formation
Manganese (Mn) & Vanadium (V) Mn ≤ 0.50, V ≤ 0.35 Deoxidation control
Phosphorus (P) & Sulfur (S) P ≤ 0.020, S ≤ 0.020 High purity for crack-resistant weld deposits

Mechanical & Physical Properties

The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:

Mechanical & Physical Property Reference — Hastelloy C22 Filler Wire
Property Value Unit Specification / Reference Basis
Tensile Strength ≥ 690 (Typical: 760 – 815) MPa AWS A5.14 Minimum / Typical All-Weld-Metal
Yield Strength (0.2% Offset) ≥ 415 (Typical: 470 – 520) MPa Typical As-Welded GTAW Deposit
Elongation ≥ 25 (Typical: 35 – 42) % AWS A5.14 Minimum in 4D
Density 8.69 g/cm³ Physical Property Reference
Melting Range 1357 – 1399 °C Physical Property Reference
Technical Verification Statement: Standard limits above reflect published AWS / ASME / EN ISO classification specifications and typical deposited weld metal properties. Actual heat-specific test results depend on wire diameter, batch chemistry and welding procedure parameters. Contact us for confirmed product specifications and available technical documentation.

Corrosion Resistance, Welding Considerations & Industrial Applications

Hastelloy C22 filler metal resists oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, seawater brine heaters and multi-purpose pharmaceutical batch reactors where chemical media change between oxidizing and reducing cycles. Maintain interpass temperature below 95°C (200°F) and use high-purity argon shielding and back-purging.

Typical Industrial Applications

  • Multi-purpose pharmaceutical and fine chemical reactors exposed to alternating oxidizing and reducing reagents
  • Cellophane manufacturing, chlorination systems and pesticide production vessels
  • Flue-gas desulfurization (FGD) reheaters, dampers and waste incineration scrubbers
  • Geothermal brine heat exchangers and sour gas flare/scrubber systems
  • Over-matching girth welds on super-austenitic stainless steel seawater piping

International Enquiry Destinations

FillerWires welcomes B2B export enquiries for Hastelloy C22 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:

International Enquiry Destinations for Hastelloy C22 Filler Wire
Target Country Relevant Industrial Cities & Ports Typical Regional Sector Demand
United Arab Emirates & Saudi Arabia Abu Dhabi, Dubai, Jubail, Yanbu, Dammam Chemical processing, desalination & sour gas scrubbers
Oman, Qatar & Kuwait Sohar, Muscat, Duqm, Doha, Ras Laffan, Ahmadi Petrochemical & seawater brine systems
United States & United Kingdom Houston, New Jersey/Philadelphia, Chicago, Manchester, Birmingham, Aberdeen Pharmaceutical vessels, specialty chemicals & offshore
Germany, Switzerland & Italy Frankfurt, Basel, Zurich, Milan, Turin, Bologna Fine chemical, pharmaceutical & pressure vessel fabrication
Singapore, Ireland & South Africa Jurong, Tuas, Cork, Dublin, Johannesburg, Durban Biopharma API reactors & chemical process plants

Frequently Asked Questions — Hastelloy C22 Filler Wire

Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Hastelloy C22 Filler Wire:

Hastelloy C22 Filler Wire is classified under AWS A5.14 ERNiCrMo-10 and EN ISO 18274 S Ni 6022 (NiCr21Mo13Fe4W3) (UNS UNS N06022, Werkstoff Nr. 2.4602). Contact us for confirmed product specifications and available technical documentation.

Hastelloy C22 Filler Wire (AWS A5.14 ERNiCrMo-10) is engineered for welding Hastelloy C22 (UNS N06022 / W.Nr. 2.4602), Hastelloy C276 (N10276), Alloy 625 (N06625), 6% Mo super-austenitic stainless steels (254 SMO, AL-6XN), and corrosion-resistant weld overlays on carbon and low-alloy steel.

Hastelloy C22 Filler Wire is supplied for GTAW (TIG), GMAW (Pulsed / Spray MIG) as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon (GTAW); Argon + Helium (Pulsed GMAW).

Hastelloy C22 filler metal resists oxidizing acid chlorides, wet chlorine, formic and acetic acids, ferric and cupric chlorides, seawater brine heaters and multi-purpose pharmaceutical batch reactors where chemical media change between oxidizing and reducing cycles. Maintain interpass temperature below 95&deg;C (200&deg;F) and use high-purity argon shielding and back-purging. Typical applications include: Multi-purpose pharmaceutical and fine chemical reactors exposed to alternating oxidizing and reducing reagents; Cellophane manufacturing, chlorination systems and pesticide production vessels; Flue-gas desulfurization (FGD) reheaters, dampers and waste incineration scrubbers.

Direct Export & Procurement Desk

International B2B Technical Enquiry & Quotation Request

Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.

Section A – Contact Information
Section B – Product Requirements
Multiple grades accepted. If unsure of the exact classification, enter “Not sure – Need technical assistance”.
Section C – Quantity Requirements
Section D – Technical and Project Details
To share technical specifications or supporting documents, please email info@fillerwires.com directly.
Direct Email: info@fillerwires.com | Tel/WhatsApp: +91 7045 212 326

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.