International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Inconel 82 Filler Wire Supplier — AWS A5.14 ERNiCr-3 Welding Wire

Nickel-Chromium-Manganese-Niobium filler metal (AWS A5.14 ERNiCr-3 / UNS N06082) engineered for welding Inconel 600/601, Incoloy 800/800HT and dissimilar joints between nickel alloys, stainless steels and carbon/low-alloy steels.

AWS A5.14 ERNiCr-3 (Filler Metal 82) UNS: UNS N06082 Werkstoff: 2.4806 GTAW (TIG), GMAW (MIG), SAW
Inconel 82 AWS A5.14 ERNiCr-3 welding filler wire
Inconel 82 (AWS A5.14 ERNiCr-3) TIG cut-length rods and layer-wound MIG spools.
Nickel Alloy Filler Wires

The Premier ERNiCr-3 Filler Metal for Dissimilar Welding & High-Temperature Creep Service

Inconel 82 Filler Wire (AWS A5.14 ERNiCr-3 / Filler Metal 82) is the globally recognized nickel-chromium-niobium welding wire for joining Alloy 600, Alloy 601, Incoloy 800, Incoloy 800H/800HT, and for executing critical dissimilar metal welds (DMW) between austenitic stainless steels, nickel alloys, and ferritic/carbon/Cr-Mo steels in power boilers, petrochemical reformers and nuclear pressure vessels.

Unlike stainless steel dissimilar filler wires (such as ER309L), ERNiCr-3 possesses a coefficient of thermal expansion closely intermediate between ferritic Cr-Mo steel and austenitic stainless steel, and resists carbon migration across the fusion line during high-temperature service above 425°C or Post-Weld Heat Treatment (PWHT). Its elevated manganese (2.5–3.5%) and niobium (2.0–3.0%) contents provide exceptional immunity to solidification hot cracking and microfissuring even under high restraint.

AWS Classification AWS A5.14 ERNiCr-3 (Filler Metal 82)
EN / ISO Classification EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb)
UNS / Werkstoff Nr. UNS N06082 / 2.4806
Welding Processes GTAW (TIG), GMAW (MIG), SAW

Alloy Identification, Standards & Supply Specifications

High manganese and niobium additions tolerate dilution from iron, chromium and silicon when buttering or joining carbon and Cr-Mo steels (such as P11, P22, P91) to stainless or nickel alloys.

Technical Product Specification Summary — Inconel 82 Filler Wire
Product Designation Inconel 82 Filler Wire (TIG Welding Rod / MIG Spooled Wire)
AWS / ASME Classification AWS A5.14 ERNiCr-3 (Filler Metal 82)
EN / ISO Classification EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb)
UNS Designation & Werkstoff Nr. UNS N06082 • W.Nr. 2.4806
Compatible Base Materials Inconel 600 (N06600), Inconel 601 (N06601), Incoloy 800 / 800H / 800HT (N08800 / N08810 / N08811), Monel 400 to carbon steel, and dissimilar joints between 304/316/347/310 stainless steels and carbon or Cr-Mo steels.
Supported Welding Processes GTAW (TIG), GMAW (MIG), SAW
Shielding Gas Recommendations 100% Argon or Ar + He (GTAW); Ar + He (Pulsed GMAW)
Available Wire Diameters MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16")
TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm
Packaging & Storage TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons.
MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film.
Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging.

Chemical Composition Specification (AWS A5.14 ERNiCr-3 (Filler Metal 82))

The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:

Chemical Composition Limits — Inconel 82 Filler Wire
Element Verified Specification Limit (wt.%) Metallurgical Function in Weld Metal
Nickel + Cobalt (Ni+Co) 67.0 min (Typical: 72%) Provides intermediate thermal expansion and prevents carbon migration
Chromium (Cr) 18.0 – 22.0 High-temperature oxidation and scaling resistance
Manganese (Mn) 2.5 – 3.5 Suppresses hot cracking and microfissuring in thick-section welds
Niobium + Tantalum (Nb+Ta) 2.0 – 3.0 Stabilizes carbon and increases creep-rupture strength
Iron (Fe) 3.0 max Low base iron allows high dilution tolerance when welding steel
Titanium (Ti) 0.75 max Grain refiner and deoxidizer
Carbon (C) 0.10 max Controlled carbon for thermal stability
Copper (Cu) 0.50 max Residual limit
Silicon (Si) 0.50 max Kept low to prevent silicate hot cracking
Phosphorus (P) & Sulfur (S) P ≤ 0.030, S ≤ 0.015 Strict impurity control

Mechanical & Physical Properties

The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:

Mechanical & Physical Property Reference — Inconel 82 Filler Wire
Property Value Unit Specification / Reference Basis
Tensile Strength ≥ 550 (Typical: 620 – 680) MPa AWS A5.14 Minimum / Typical All-Weld-Metal
Yield Strength (0.2% Offset) ≥ 360 (Typical: 390 – 440) MPa Typical As-Welded GTAW/GMAW Deposit
Elongation ≥ 30 (Typical: 38 – 42) % AWS A5.14 Minimum in 4D
Charpy V-Notch Impact (-196°C) ≥ 100 J Typical Cryogenic Toughness
Density 8.47 g/cm³ Physical Property Reference
Melting Range 1345 – 1400 °C Physical Property Reference
Technical Verification Statement: Standard limits above reflect published AWS / ASME / EN ISO classification specifications and typical deposited weld metal properties. Actual heat-specific test results depend on wire diameter, batch chemistry and welding procedure parameters. Contact us for confirmed product specifications and available technical documentation.

Corrosion Resistance, Welding Considerations & Industrial Applications

Inconel 82 weld metal exhibits outstanding oxidation resistance up to 1000°C and high notch toughness down to -196°C. It is preferred over ER309L whenever a dissimilar ferritic-to-austenitic joint operates in the creep regime (>425°C), undergoes thermal cycling, or requires high-temperature PWHT.

Typical Industrial Applications

  • Dissimilar metal welds (DMW) between Cr-Mo boiler tubes/headers (P11, P22, P91) and 304H/316H/347H stainless steel superheaters
  • Welding Inconel 600/601 and Incoloy 800H/800HT pigtails, headers and transfer lines in steam methane reformers and ethylene crackers
  • Buttering and weld overlay cladding on nuclear and petrochemical pressure vessel nozzles
  • Cryogenic storage vessels and liquefied gas piping systems
  • Joining Monel 400 or Nickel 200 to carbon steel or stainless steel

International Enquiry Destinations

FillerWires welcomes B2B export enquiries for Inconel 82 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:

International Enquiry Destinations for Inconel 82 Filler Wire
Target Country Relevant Industrial Cities & Ports Typical Regional Sector Demand
Saudi Arabia Jubail, Yanbu, Dammam, Riyadh, Rabigh Petrochemical reformers, crackers & utility power boilers
United Arab Emirates & Oman Abu Dhabi, Ruwais, Dubai, Sohar, Muscat, Duqm Refinery heaters, HRSG boilers & dissimilar piping
Qatar, Kuwait & Bahrain Ras Laffan, Mesaieed, Ahmadi, Shuaiba, Manama, Sitra LNG reformers, ammonia plants & power stations
United States & United Kingdom Houston, Pittsburgh, Chicago, Sheffield, Aberdeen, Derby/Glasgow Power generation boilers, nuclear & petrochemical fabrication
Germany, France & Italy Mannheim, Essen, Hamburg, Paris, Lyon, Milan, Turin, Brescia Steam generators, heat recovery boilers & furnace coils
Singapore, South Africa & Peru Jurong Island, Johannesburg, Secunda/Sasolburg, Lima, Talara Synfuels, refining & high-temperature process headers

Frequently Asked Questions — Inconel 82 Filler Wire

Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Inconel 82 Filler Wire:

Inconel 82 Filler Wire is classified under AWS A5.14 ERNiCr-3 (Filler Metal 82) and EN ISO 18274 S Ni 6082 (NiCr20Mn3Nb) (UNS UNS N06082, Werkstoff Nr. 2.4806). Contact us for confirmed product specifications and available technical documentation.

Inconel 82 Filler Wire (AWS A5.14 ERNiCr-3 (Filler Metal 82)) is engineered for welding Inconel 600 (N06600), Inconel 601 (N06601), Incoloy 800 / 800H / 800HT (N08800 / N08810 / N08811), Monel 400 to carbon steel, and dissimilar joints between 304/316/347/310 stainless steels and carbon or Cr-Mo steels.

Inconel 82 Filler Wire is supplied for GTAW (TIG), GMAW (MIG), SAW as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon or Ar + He (GTAW); Ar + He (Pulsed GMAW).

Inconel 82 weld metal exhibits outstanding oxidation resistance up to 1000&deg;C and high notch toughness down to -196&deg;C. It is preferred over ER309L whenever a dissimilar ferritic-to-austenitic joint operates in the creep regime (&gt;425&deg;C), undergoes thermal cycling, or requires high-temperature PWHT. Typical applications include: Dissimilar metal welds (DMW) between Cr-Mo boiler tubes/headers (P11, P22, P91) and 304H/316H/347H stainless steel superheaters; Welding Inconel 600/601 and Incoloy 800H/800HT pigtails, headers and transfer lines in steam methane reformers and ethylene crackers; Buttering and weld overlay cladding on nuclear and petrochemical pressure vessel nozzles.

Direct Export & Procurement Desk

International B2B Technical Enquiry & Quotation Request

Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.

Section A – Contact Information
Section B – Product Requirements
Multiple grades accepted. If unsure of the exact classification, enter “Not sure – Need technical assistance”.
Section C – Quantity Requirements
Section D – Technical and Project Details
To share technical specifications or supporting documents, please email info@fillerwires.com directly.
Direct Email: info@fillerwires.com | Tel/WhatsApp: +91 7045 212 326

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.