Inconel 825 Filler Wire Supplier — Alloy 825 / ERNiFeCr-1 Welding Wire
Titanium-stabilized Nickel-Iron-Chromium-Molybdenum-Copper filler wire (Alloy 825 / AWS A5.14 ERNiFeCr-1 / UNS N08825) for sulfuric and phosphoric acid equipment, sour gas piping and marine exhaust systems.
Balanced Ni-Fe-Cr-Mo-Cu Filler Wire for Reducing & Oxidizing Acid Environments
Inconel 825 Filler Wire (also designated as Incoloy 825 / Alloy 825 / AWS A5.14 ERNiFeCr-1 / Filler Metal 65) is a titanium-stabilized nickel-iron-chromium alloy with deliberate additions of molybdenum (2.5–3.5%) and copper (1.5–3.0%). The ~42% nickel content renders the alloy immune to chloride-ion stress-corrosion cracking, while copper and molybdenum provide strong resistance to reducing acids such as sulfuric and phosphoric acids.
In engineering practice, Alloy 825 base metal is welded either with matching ERNiFeCr-1 (Inconel 825) filler wire—particularly in sulfuric acid environments where copper and lower cost are desired—or with over-alloyed Inconel 625 (ERNiCrMo-3) filler wire when maximum localized pitting resistance in severe chloride/sour media is required. FillerWires supplies both options to match your qualified WPS.
Alloy Identification, Standards & Supply Specifications
Titanium stabilization (0.6–1.2% Ti) locks up carbon as stable titanium carbides during solidification, preventing chromium depletion along grain boundaries in the as-welded condition.
| Product Designation | Inconel 825 Filler Wire (TIG Welding Rod / MIG Spooled Wire) |
|---|---|
| AWS / ASME Classification | AWS A5.14 ERNiFeCr-1 (Filler Metal 65) / Alloy 825 |
| EN / ISO Classification | EN ISO 18274 S Ni 8065 (NiFe30Cr21Mo3) |
| UNS Designation & Werkstoff Nr. | UNS N08825 / N08065 • W.Nr. 2.4858 |
| Compatible Base Materials | Incoloy / Inconel 825 (UNS N08825 / W.Nr. 2.4858) plate, pipe, tubing and clad vessels, Alloy 20, and dissimilar joints to austenitic stainless steels. |
| Supported Welding Processes | GTAW (TIG), GMAW (MIG) |
| Shielding Gas Recommendations | 100% Argon (GTAW); Argon + Helium (GMAW) |
| Available Wire Diameters | MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16") TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm |
| Packaging & Storage | TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons. MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film. Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging. |
Chemical Composition Specification (AWS A5.14 ERNiFeCr-1 (Filler Metal 65) / Alloy 825)
The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:
| Element | Verified Specification Limit (wt.%) | Metallurgical Function in Weld Metal |
|---|---|---|
| Nickel (Ni) | 38.0 – 46.0 | Prevents chloride stress-corrosion cracking and stabilizes austenite |
| Chromium (Cr) | 19.5 – 23.5 | Confers resistance to oxidizing media, nitric acid and nitrates |
| Iron (Fe) | 22.0 min (Remainder ~30%) | Matrix balance in the Ni-Fe-Cr system |
| Molybdenum (Mo) | 2.5 – 3.5 | Resists chloride pitting and crevice corrosion |
| Copper (Cu) | 1.5 – 3.0 | Improves corrosion resistance in sulfuric and phosphoric acids |
| Titanium (Ti) | 0.60 – 1.20 | Stabilizes against intergranular sensitization after welding |
| Carbon (C) | 0.05 max | Low carbon to preserve corrosion resistance |
| Manganese (Mn) | 1.0 max | Weld pool deoxidizer and sulfide former |
| Silicon (Si) | 0.50 max | Controlled low silicon to prevent hot cracking |
| Aluminum (Al) | 0.20 max | Deoxidizer |
Mechanical & Physical Properties
The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:
| Property | Value | Unit | Specification / Reference Basis |
|---|---|---|---|
| Tensile Strength | ≥ 550 (Typical: 600 – 660) | MPa | AWS A5.14 ERNiFeCr-1 Minimum / Typical |
| Yield Strength (0.2% Offset) | ≥ 350 (Typical: 390 – 430) | MPa | Typical As-Welded GTAW Deposit |
| Elongation | ≥ 30 (Typical: 35) | % | In 50 mm Gauge Length |
| Density | 8.14 | g/cm³ | Physical Property Reference |
| Melting Range | 1370 – 1400 | °C | Physical Property Reference |
Corrosion Resistance, Welding Considerations & Industrial Applications
Inconel 825 filler wire delivers dependable corrosion resistance in sulfuric acid, phosphoric acid, sulfur-containing flue gases, sour gas wells and seawater cooling heat exchangers. Clean joint surfaces thoroughly prior to welding and maintain interpass temperatures below 150°C.
Typical Industrial Applications
- Sulfuric acid pickling heating coils, tanks, crates and acid recovery piping
- Phosphoric acid evaporators and ammonium sulfate scrubbers in fertilizer complexes
- Sour gas and crude oil gathering flowlines, separators and clad vessels
- Seawater-cooled heat exchangers, marine exhaust piping and offshore topside piping
- Nuclear fuel reprocessing and radioactive waste handling vessels
International Enquiry Destinations
FillerWires welcomes B2B export enquiries for Inconel 825 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:
| Target Country | Relevant Industrial Cities & Ports | Typical Regional Sector Demand |
|---|---|---|
| United Arab Emirates | Abu Dhabi, Ruwais, Dubai, Jebel Ali | Sour gas separators, clad piping & offshore modules |
| Kuwait & Saudi Arabia | Ahmadi, Shuaiba, Jubail, Dammam, Yanbu | Refinery acid units, sour gas & phosphate plants |
| Oman, Qatar & Bahrain | Sohar, Duqm, Doha, Ras Laffan, Sitra | Gas sweetening, petrochemical & marine heat exchangers |
| United States & United Kingdom | Houston, Dallas, Pittsburgh, Aberdeen, Birmingham | Oilfield tubulars, chemical processing & offshore |
| Germany, Italy & Belgium | Düsseldorf, Hamburg, Milan, Genoa, Antwerp | Acid plant vessels & chemical process equipment |
| South Africa, Peru & Singapore | Johannesburg, Durban, Lima, Callao, Jurong, Tuas | Acid leaching, petrochemical & marine modules |
Frequently Asked Questions — Inconel 825 Filler Wire
Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Inconel 825 Filler Wire:
Inconel 825 Filler Wire is classified under AWS A5.14 ERNiFeCr-1 (Filler Metal 65) / Alloy 825 and EN ISO 18274 S Ni 8065 (NiFe30Cr21Mo3) (UNS UNS N08825 / N08065, Werkstoff Nr. 2.4858). Contact us for confirmed product specifications and available technical documentation.
Inconel 825 Filler Wire (AWS A5.14 ERNiFeCr-1 (Filler Metal 65) / Alloy 825) is engineered for welding Incoloy / Inconel 825 (UNS N08825 / W.Nr. 2.4858) plate, pipe, tubing and clad vessels, Alloy 20, and dissimilar joints to austenitic stainless steels.
Inconel 825 Filler Wire is supplied for GTAW (TIG), GMAW (MIG) as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon (GTAW); Argon + Helium (GMAW).
Inconel 825 filler wire delivers dependable corrosion resistance in sulfuric acid, phosphoric acid, sulfur-containing flue gases, sour gas wells and seawater cooling heat exchangers. Clean joint surfaces thoroughly prior to welding and maintain interpass temperatures below 150°C. Typical applications include: Sulfuric acid pickling heating coils, tanks, crates and acid recovery piping; Phosphoric acid evaporators and ammonium sulfate scrubbers in fertilizer complexes; Sour gas and crude oil gathering flowlines, separators and clad vessels.
International B2B Technical Enquiry & Quotation Request
Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.