Alloy 20 Filler Wire Supplier — AWS A5.9 ER320 & ER320LR Welding Wire
Niobium-stabilized Nickel-Chromium-Molybdenum-Copper filler wire (ER320 / ER320LR / UNS N08020) engineered for hot sulfuric acid piping, heat exchangers and chemical process tanks.
Sulfuric Acid & Stress-Corrosion Cracking Resistant Filler Metal
Alloy 20 Filler Wire (classified under AWS A5.9 ER320 and ER320LR) is a fully austenitic iron-nickel-chromium-molybdenum-copper welding consumable stabilized with niobium (columbium). Originally developed to withstand direct contact with hot sulfuric acid, Alloy 20 combines the chloride stress-corrosion cracking resistance of high-nickel alloys with the oxidizing acid resistance of chromium-molybdenum stainless steels.
The Low-Residual variant (ER320LR) restricts carbon (≤0.025%), silicon (≤0.15%), phosphorus (≤0.015%) and sulfur (≤0.020%) to ultra-low levels, substantially reducing hot solidification microfissuring during fully austenitic multi-pass GTAW and GMAW welding.
Alloy Identification, Standards & Supply Specifications
Because Alloy 20 solidifies as 100% primary austenite with zero delta-ferrite (0 FN), low-residual chemistry (ER320LR) and stringer-bead low-heat-input procedures are essential for sound, fissure-free welds.
| Product Designation | Alloy 20 Filler Wire (TIG Welding Rod / MIG Spooled Wire) |
|---|---|
| AWS / ASME Classification | AWS A5.9 ER320 / ER320LR |
| EN / ISO Classification | EN ISO 14343-B SS320 / NiCr20CuMo |
| UNS Designation & Werkstoff Nr. | UNS N08020 (Wire: N08021 / N08022) • W.Nr. 2.4660 |
| Compatible Base Materials | Carpenter 20Cb-3 (UNS N08020), ASTM B463 / B464 / B468 / B473 Alloy 20 plate, pipe and forgings, CN7M castings, and dissimilar joints between Alloy 20 and 316L stainless steel. |
| Supported Welding Processes | GTAW (TIG), GMAW (MIG), SAW |
| Shielding Gas Recommendations | 100% Argon (GTAW); Argon + Helium or Ar + 1% O2 (Pulsed GMAW) |
| Available Wire Diameters | MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16") TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm |
| Packaging & Storage | TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons. MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film. Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging. |
Chemical Composition Specification (AWS A5.9 ER320 / ER320LR)
The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:
| Element | Verified Specification Limit (wt.%) | Metallurgical Function in Weld Metal |
|---|---|---|
| Carbon (C) | 0.07 max (ER320) / 0.025 max (ER320LR) | Low carbon minimizes carbide precipitation in the HAZ |
| Chromium (Cr) | 19.0 – 21.0 | Provides passivity in nitric and oxidizing acid mixtures |
| Nickel (Ni) | 32.0 – 36.0 | Ensures resistance to chloride stress-corrosion cracking (SCC) |
| Molybdenum (Mo) | 2.0 – 3.0 | Enhances localized pitting and crevice corrosion resistance |
| Copper (Cu) | 3.0 – 4.0 | Critical element conferring resistance to hot sulfuric acid |
| Niobium + Tantalum (Nb+Ta) | 8 × C min to 1.00 max (ER320LR: ≤0.40) | Stabilizes carbon against intergranular sensitization |
| Manganese (Mn) | 2.5 max (ER320) / 1.5 – 2.0 (ER320LR) | Binds trace sulfur to prevent low-melting grain boundary films |
| Silicon (Si) | 0.60 max (ER320) / 0.15 max (ER320LR) | Strictly restricted in ER320LR to prevent hot cracking |
| Phosphorus (P) & Sulfur (S) | P ≤ 0.015, S ≤ 0.020 (ER320LR) | Ultra-low residuals for crack-free fully austenitic welds |
| Iron (Fe) | Remainder (~33%) | Matrix balance |
Mechanical & Physical Properties
The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:
| Property | Value | Unit | Specification / Reference Basis |
|---|---|---|---|
| Tensile Strength | ≥ 550 (Typical: 600 – 650) | MPa | AWS A5.9 / Typical Deposited Weld Metal |
| Yield Strength (0.2% Offset) | ≥ 240 (Typical: 380 – 420) | MPa | Typical As-Welded GTAW Deposit |
| Elongation | ≥ 30 (Typical: 35 – 40) | % | In 50 mm (2 in.) Gauge Length |
| Hardness | 160 – 195 | HB | Typical Deposited Weld Metal |
| Density | 8.08 | g/cm³ | Physical Property Reference |
| Melting Range | 1385 – 1443 | °C | Physical Property Reference |
Corrosion Resistance, Welding Considerations & Industrial Applications
Alloy 20 filler metal excels in 10–40% sulfuric acid at elevated temperatures, phosphoric acid, nitric acid, organic acids and mixed acid pickling baths. During welding, maintain interpass temperatures below 95°C (200°F), use narrow stringer beads without wide oscillation, and fill all arc craters carefully to prevent crater cracking.
Typical Industrial Applications
- Sulfuric acid storage tanks, dilution coolers, piping and heat exchangers
- Phosphoric acid evaporators and synthetic rubber / plastics manufacturing reactors
- Pharmaceutical and fine chemical processing vessels and agitator shafts
- Metal pickling tanks, acid recovery units and flue-gas scrubbing internals
- Hydrometallurgical copper, nickel and gold acid-leaching autoclaves and piping
International Enquiry Destinations
FillerWires welcomes B2B export enquiries for Alloy 20 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:
| Target Country | Relevant Industrial Cities & Ports | Typical Regional Sector Demand |
|---|---|---|
| Saudi Arabia | Jubail, Yanbu, Ras Al-Khair, Dammam | Phosphate fertilizer & sulfuric acid complexes |
| United Arab Emirates | Abu Dhabi, Ruwais, Dubai, Jebel Ali | Downstream chemical & specialty process skids |
| Oman & Qatar | Sohar, Duqm, Muscat, Mesaieed | Petrochemical & industrial acid units |
| United States | Houston, Baton Rouge, Pittsburgh, Chicago | Gulf Coast chemical & petrochemical plants |
| Germany & Italy | Frankfurt, Hamburg, Milan, Turin, Bologna | Chemical reactor & heat exchanger fabrication |
| South Africa & Peru | Johannesburg, Durban, Richards Bay, Lima, Callao, Ilo | Mining sulfuric acid leaching & refining plants |
| Singapore & United Kingdom | Jurong Island, Tuas, Birmingham, Teesside/Newcastle | Pharmaceutical & specialty chemical piping |
Frequently Asked Questions — Alloy 20 Filler Wire
Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Alloy 20 Filler Wire:
Alloy 20 Filler Wire is classified under AWS A5.9 ER320 / ER320LR and EN ISO 14343-B SS320 / NiCr20CuMo (UNS UNS N08020 (Wire: N08021 / N08022), Werkstoff Nr. 2.4660). Contact us for confirmed product specifications and available technical documentation.
Alloy 20 Filler Wire (AWS A5.9 ER320 / ER320LR) is engineered for welding Carpenter 20Cb-3 (UNS N08020), ASTM B463 / B464 / B468 / B473 Alloy 20 plate, pipe and forgings, CN7M castings, and dissimilar joints between Alloy 20 and 316L stainless steel.
Alloy 20 Filler Wire is supplied for GTAW (TIG), GMAW (MIG), SAW as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon (GTAW); Argon + Helium or Ar + 1% O2 (Pulsed GMAW).
Alloy 20 filler metal excels in 10–40% sulfuric acid at elevated temperatures, phosphoric acid, nitric acid, organic acids and mixed acid pickling baths. During welding, maintain interpass temperatures below 95°C (200°F), use narrow stringer beads without wide oscillation, and fill all arc craters carefully to prevent crater cracking. Typical applications include: Sulfuric acid storage tanks, dilution coolers, piping and heat exchangers; Phosphoric acid evaporators and synthetic rubber / plastics manufacturing reactors; Pharmaceutical and fine chemical processing vessels and agitator shafts.
International B2B Technical Enquiry & Quotation Request
Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.