International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Stainless Steel ER308L Filler Wire Supplier — AWS A5.9 ER308L TIG & MIG Wire

Low-carbon (0.03% max C) 19Cr-9Ni austenitic stainless steel filler wire (AWS A5.9 ER308L / UNS S30883) engineered for intergranular-corrosion-resistant welding of AISI 304, 304L, 321 and 347 stainless steels.

AWS A5.9 / ASME SFA-5.9 ER308L UNS: UNS S30883 Werkstoff: 1.4316 GTAW (TIG), GMAW (MIG), SAW
AWS A5.9 ER308L Stainless Steel TIG and MIG Filler Wire
AWS A5.9 ER308L low-carbon stainless steel TIG cut-length rods and MIG spools.
Stainless Steel Filler Wires

Extra-Low Carbon 19Cr-9Ni Filler Wire for Sensitization-Free 304/304L Welding

Stainless Steel ER308L Filler Wire (classified under AWS A5.9 ER308L and EN ISO 14343-A 19 9 L) is the primary austenitic stainless steel welding consumable for joining AISI 304 and 304L (18Cr-8Ni) base metals. By restricting carbon content to 0.03% maximum, ER308L prevents intergranular chromium carbide precipitation (sensitization) in the weld metal without requiring niobium or titanium stabilizers, allowing welded assemblies to enter corrosive service in the as-welded condition.

Our ER308L chemistry is balanced to solidify in the primary ferritic-austenitic mode with a controlled delta-ferrite content (typically 4–10 FN), providing high resistance to hot solidification cracking while preserving excellent Charpy impact toughness down to cryogenic temperatures (-196°C).

AWS Classification AWS A5.9 / ASME SFA-5.9 ER308L
EN / ISO Classification EN ISO 14343-A W/G 19 9 L (W.Nr. 1.4316)
UNS / Werkstoff Nr. UNS S30883 / 1.4316
Welding Processes GTAW (TIG), GMAW (MIG), SAW

Alloy Identification, Standards & Supply Specifications

Controlled Cr/Ni ratio ensures optimal delta-ferrite for crack immunity without risking brittle sigma-phase formation during service.

Technical Product Specification Summary — Stainless Steel ER308L Filler Wire
Product Designation Stainless Steel ER308L Filler Wire (TIG Welding Rod / MIG Spooled Wire)
AWS / ASME Classification AWS A5.9 / ASME SFA-5.9 ER308L
EN / ISO Classification EN ISO 14343-A W/G 19 9 L (W.Nr. 1.4316)
UNS Designation & Werkstoff Nr. UNS S30883 • W.Nr. 1.4316
Compatible Base Materials AISI 304, 304L, 304LN (UNS S30400, S30403), ASTM A240 / A312 TP304/TP304L, CF3 / CF8 cast stainless steels, and AISI 321 / 347 for service temperatures below 350°C.
Supported Welding Processes GTAW (TIG), GMAW (MIG), SAW
Shielding Gas Recommendations 100% Argon (GTAW); Ar + 1–2% O2 or Ar + 2% CO2 (GMAW)
Available Wire Diameters MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16")
TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm
Packaging & Storage TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons.
MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film.
Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging.

Chemical Composition Specification (AWS A5.9 / ASME SFA-5.9 ER308L)

The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:

Chemical Composition Limits — Stainless Steel ER308L Filler Wire
Element Verified Specification Limit (wt.%) Metallurgical Function in Weld Metal
Carbon (C) 0.03 max Extra-low carbon prevents intergranular carbide precipitation
Chromium (Cr) 19.5 – 22.0 Forms passive Cr2O3 surface film for atmospheric and nitric acid resistance
Nickel (Ni) 9.0 – 11.0 Stabilizes the austenitic matrix and provides cryogenic toughness
Manganese (Mn) 1.0 – 2.5 Assists deoxidation and resists hot solidification cracking
Silicon (Si) 0.30 – 0.65 (ER308LSi: 0.65–1.00) Controls weld pool fluidity and bead wetting
Molybdenum (Mo) 0.75 max Residual limit per AWS A5.9
Copper (Cu) 0.75 max Residual limit per AWS A5.9
Phosphorus (P) & Sulfur (S) P ≤ 0.030, S ≤ 0.030 Strictly limited to prevent solidification microfissuring
Iron (Fe) Remainder Austenitic-ferritic matrix balance

Mechanical & Physical Properties

The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:

Mechanical & Physical Property Reference — Stainless Steel ER308L Filler Wire
Property Value Unit Specification / Reference Basis
Tensile Strength ≥ 520 (Typical: 570 – 610) MPa Typical All-Weld-Metal Deposit (AWS A5.9 / ISO 14343)
Yield Strength (0.2% Offset) ≥ 350 (Typical: 400 – 440) MPa Typical As-Welded GTAW/GMAW Deposit
Elongation ≥ 35 (Typical: 40 – 45) % In 5D / 50 mm Gauge Length
Charpy V-Notch Impact (-196°C) ≥ 47 (Typical: 65 – 95) J Typical GTAW Weld Metal Toughness
Ferrite Number (FN) 4 – 10 FN Typical WRC-1992 Constitution Diagram Range
Density 7.90 g/cm³ Physical Property Reference
Technical Verification Statement: Standard limits above reflect published AWS / ASME / EN ISO classification specifications and typical deposited weld metal properties. Actual heat-specific test results depend on wire diameter, batch chemistry and welding procedure parameters. Contact us for confirmed product specifications and available technical documentation.

Corrosion Resistance, Welding Considerations & Industrial Applications

ER308L filler wire resists nitric acid, organic acids, food/beverage media and atmospheric exposure. Do not preheat; keep interpass temperatures below 150°C (300°F), use stainless steel wire brushes exclusively, and apply pure Argon back-purging on sanitary and process pipe root runs.

Typical Industrial Applications

  • Chemical, petrochemical and nitric acid storage tanks, piping and heat exchangers (304/304L)
  • Cryogenic LNG piping, liquid nitrogen/oxygen storage vessels and cold-box equipment
  • Food, dairy, brewery, wine and commercial kitchen sanitary stainless steel equipment
  • Pharmaceutical clean-steam and water-for-injection (WFI) skids and architectural stainless structures

International Enquiry Destinations

FillerWires welcomes B2B export enquiries for Stainless Steel ER308L Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:

International Enquiry Destinations for Stainless Steel ER308L Filler Wire
Target Country Relevant Industrial Cities & Ports Typical Regional Sector Demand
United Arab Emirates Dubai, Abu Dhabi, Sharjah, Ajman, Jebel Ali Process skids, architectural stainless & food machinery
Oman, Saudi Arabia & Qatar Muscat, Sohar, Riyadh, Dammam, Jeddah, Doha, Ras Laffan LNG cryogenic lines, water tanks & industrial piping
Kuwait & Bahrain Kuwait City, Shuwaikh, Ahmadi, Manama, Hidd Refinery utility piping & commercial fabrication
United States & United Kingdom Houston, Chicago, Los Angeles, Birmingham, Manchester, Glasgow Food/dairy tanks, cryogenic vessels & general shop fabrication
Italy, Germany & Europe Milan, Bologna, Parma, Turin, Hamburg, Munich, Rotterdam, Warsaw Hygienic food/packaging machinery & pressure vessels
Sri Lanka, Singapore, South Africa & Peru Colombo, Galle, Jurong, Tuas, Johannesburg, Cape Town, Lima Tea/dairy/beverage plants, marine & industrial fabrication

Frequently Asked Questions — Stainless Steel ER308L Filler Wire

Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Stainless Steel ER308L Filler Wire:

Stainless Steel ER308L Filler Wire is classified under AWS A5.9 / ASME SFA-5.9 ER308L and EN ISO 14343-A W/G 19 9 L (W.Nr. 1.4316) (UNS UNS S30883, Werkstoff Nr. 1.4316). Contact us for confirmed product specifications and available technical documentation.

Stainless Steel ER308L Filler Wire (AWS A5.9 / ASME SFA-5.9 ER308L) is engineered for welding AISI 304, 304L, 304LN (UNS S30400, S30403), ASTM A240 / A312 TP304/TP304L, CF3 / CF8 cast stainless steels, and AISI 321 / 347 for service temperatures below 350°C.

Stainless Steel ER308L Filler Wire is supplied for GTAW (TIG), GMAW (MIG), SAW as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon (GTAW); Ar + 1–2% O2 or Ar + 2% CO2 (GMAW).

ER308L filler wire resists nitric acid, organic acids, food/beverage media and atmospheric exposure. Do not preheat; keep interpass temperatures below 150&deg;C (300&deg;F), use stainless steel wire brushes exclusively, and apply pure Argon back-purging on sanitary and process pipe root runs. Typical applications include: Chemical, petrochemical and nitric acid storage tanks, piping and heat exchangers (304/304L); Cryogenic LNG piping, liquid nitrogen/oxygen storage vessels and cold-box equipment; Food, dairy, brewery, wine and commercial kitchen sanitary stainless steel equipment.

Direct Export & Procurement Desk

International B2B Technical Enquiry & Quotation Request

Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.

Section A – Contact Information
Section B – Product Requirements
Multiple grades accepted. If unsure of the exact classification, enter “Not sure – Need technical assistance”.
Section C – Quantity Requirements
Section D – Technical and Project Details
To share technical specifications or supporting documents, please email info@fillerwires.com directly.
Direct Email: info@fillerwires.com | Tel/WhatsApp: +91 7045 212 326

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.