International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Copper Nickel Filler Wires — Cupro Nickel 70/30 & 90/10 (ERCuNi)

Marine-grade copper-nickel TIG welding rods and MIG spooled filler wires engineered for seawater desalination plants, offshore cooling water networks, heat exchangers and shipbuilding.

AWS A5.7 ERCuNi CuNi 70/30 & CuNi 90/10 Seawater, Desalination & Marine
Copper Nickel 70/30 and 90/10 ERCuNi Welding Filler Wires
Cupro-Nickel 70/30 and 90/10 GTAW (TIG) straight rods and GMAW (MIG) spools.
Copper-Nickel Welding Consumables

Biofouling & Seawater Erosion-Corrosion Resistant Filler Metals

FillerWires supplies copper-nickel (Cupro-Nickel) welding filler wires covering both 70/30 (CuNi30Mn1FeTi / AWS A5.7 ERCuNi) and 90/10 (CuNi10Fe1Mn) alloy systems. Copper-nickel alloys form a protective, adherent cuprous oxide surface film in flowing seawater that resists chloride pitting, crevice corrosion, stress-corrosion cracking and marine biofouling.

To prevent weld metal gas porosity during arc welding, our copper-nickel filler wires are formulated with controlled additions of titanium (typically 0.20–0.50% Ti) and manganese, which act as powerful deoxidizers and denitriders in both GTAW (TIG) and GMAW (MIG) processes.

AWS Classification AWS A5.7 / ASME SFA-5.7 ERCuNi
EN ISO Classification EN ISO 24373 S Cu 7158 (CuNi30)
Core Alloy Grades Cupro Nickel 70/30 & Cupro Nickel 90/10
Primary Applications Desalination, Ship Hulls, Seawater Piping

Contact us for confirmed product specifications and available technical documentation.

AWS A5.7 ERCuNi / UNS C71580 Cupro Nickel 70/30 Filler Wire ERCuNi

Cupro Nickel 70/30 Filler Wire (ERCuNi)

Nominal 67% Cu – 30% Ni filler wire with controlled iron, manganese and titanium deoxidizers. Under AWS A5.7, ERCuNi (70/30) is the standard filler metal used to weld both 70/30 (UNS C71500) AND 90/10 (UNS C70600) base metals, ensuring that the weld deposit remains cathodic (nobler) relative to 90/10 pipe in seawater service.

CuNi 90/10 / UNS C70600 Type Cupro Nickel 90/10 Filler Wire

Cupro Nickel 90/10 Filler Wire

Copper-nickel 90/10 welding wire (88% Cu – 10% Ni – 1.4% Fe – 0.8% Mn) supplied for matching-composition welds on C70600 (CW352H) seawater cooling lines, offshore firewater manifolds, condenser shells and marine cladding where procedure specifications mandate matching 90/10 chemistry.

Technical Comparison: Cupro Nickel 70/30 vs. Cupro Nickel 90/10 Filler Wires
Parameter Cupro Nickel 70/30 Filler Wire (View Page) Cupro Nickel 90/10 Filler Wire (View Page)
AWS / EN ISO Classification AWS A5.7 ERCuNi / EN ISO 24373 S Cu 7158 (CuNi30Mn1FeTi) EN ISO 24373 S Cu 7061 (CuNi10Fe1MnTi) / Matching C70600
UNS Number UNS C71580 / C71581 UNS C70600 / C70620 Series
Nickel (Ni + Co) Content 29.0% – 32.0% 9.0% – 11.0%
Iron (Fe) Content 0.40% – 0.75% 1.0% – 1.8%
Titanium (Ti) Deoxidizer 0.20% – 0.50% 0.15% – 0.50% (Deoxidized Welding Grade)
Copper (Cu) Content Remainder (~67%) Remainder (~87%)
Minimum Tensile Strength ≥ 345 MPa (50 ksi) per AWS A5.7 ≥ 300 MPa (44 ksi) Typical Deposited Weld
Base Metal Compatibility Welds both 70/30 (C71500), 90/10 (C70600), and dissimilar joints to Monel 400 or carbon steel (with buffer) Matching composition welds on 90/10 (C70600 / CuNi10Fe1Mn) marine piping and cladding
Global Export Destinations

International Markets for Copper Nickel Filler Wires

Desalination plants, offshore yards and naval/commercial shipyards across the Middle East, Europe, Asia-Pacific and the Americas represent key enquiry markets for our 70/30 and 90/10 copper-nickel filler wires:

International Markets for Copper Nickel Filler Wires
Target Country Relevant Maritime, Desalination & Offshore Cities Primary Industrial Demand
United Arab Emirates (UAE) Dubai, Abu Dhabi, Sharjah, Fujairah, Jebel Ali, Ras Al Khaimah MSF/MED desalination evaporators, drydock shiprepair & offshore seawater cooling
Oman & Bahrain Muscat, Sohar, Duqm, Salalah, Sur, Manama, Hidd, Sitra Duqm/Hidd shipyards, coastal power/desalination plants & offshore firewater piping
Saudi Arabia, Qatar & Kuwait Jubail, Dammam, Jeddah, Yanbu, Ras Al-Khair, Doha, Ras Laffan, Shuwaikh, Shuaiba Saline water conversion plants, LNG seawater intake manifolds & naval vessels
Singapore & Sri Lanka Jurong, Tuas, Pioneer, Changi, Colombo, Trincomalee, Galle, Hambantota FPSO seawater modules, shipyards, marine condensers & heat exchangers
Italy, Germany, Netherlands & UK Genoa, Venice, Trieste, Naples, Hamburg, Rotterdam, Aberdeen, Southampton, Glasgow Cruise/naval shipbuilding, offshore wind platforms & marine heat exchangers
United States, South Africa & Peru Houston, New Orleans, San Diego, Norfolk/Baltimore, Durban, Cape Town, Callao, Ilo Gulf of Mexico offshore rigs, coastal condensers & maritime fleet maintenance
Copper-Nickel Technical FAQ

Frequently Asked Questions — Copper Nickel Filler Wires

Technical answers on AWS A5.7 ERCuNi 70/30 and Cupro Nickel 90/10 marine welding consumables.

Yes. Under AWS A5.7, 70/30 ERCuNi filler wire is widely used to weld both 70/30 (UNS C71500) and 90/10 (UNS C70600) base metals so that the deposited weld seam remains slightly cathodic (nobler) relative to 90/10 pipe in flowing seawater. Matching 90/10 CuNi filler wire is also available when mandated by project WPS.

Arc welding of unalloyed copper-nickel causes severe gas porosity. Controlled titanium (0.20–0.50% Ti) and manganese additions in ERCuNi and CuNi 90/10 filler wires act as deoxidizers and nitrogen scavengers to produce dense, radiograph-quality welds.

They are specified for Multi-Stage Flash (MSF) and MED desalination evaporator shells, offshore platform seawater cooling and firewater piping (EEMUA 144), naval ship condensers and marine hull sheathing.

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.