International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Inconel 617 Filler Wire Supplier — AWS A5.14 ERNiCrCoMo-1 Welding Wire

Solid-solution Nickel-Chromium-Cobalt-Molybdenum-Aluminum filler wire (AWS A5.14 ERNiCrCoMo-1 / UNS N06617) for extreme creep-rupture strength and oxidation/carburization resistance up to 1100°C.

AWS A5.14 ERNiCrCoMo-1 UNS: UNS N06617 Werkstoff: 2.4627 (Base Metal: 2.4663) GTAW (TIG), GMAW (Pulsed / Spray MIG)
Inconel 617 AWS A5.14 ERNiCrCoMo-1 high temperature filler wire
Inconel 617 (AWS A5.14 ERNiCrCoMo-1) TIG rods and MIG wires for ultra-high-temperature service.
Nickel Alloy Filler Wires

Ultra-High-Temperature Creep & Carburization Resistant Ni-Cr-Co-Mo-Al Filler Metal

Inconel 617 Filler Wire (AWS A5.14 ERNiCrCoMo-1 / Alloy 617 Filler Metal) is a premier solid-solution strengthened nickel-chromium-cobalt-molybdenum alloy engineered for structural weld integrity at temperatures from 800°C to 1100°C (1470°F to 2010°F). Cobalt (10.0–15.0%) and molybdenum (8.0–10.0%) provide extraordinary high-temperature creep-rupture strength, while high chromium (20.0–24.0%) combined with aluminum (0.80–1.50%) forms a protective subsurface alumina/chromia scale.

Inconel 617 filler metal is widely specified for welding Alloy 617, Incoloy 800H/800HT, Alloy 602CA and cast HP/HK heat-resistant alloys in ethylene cracking furnaces, steam methane reformer manifolds, gas turbine combustion cans, nitric acid catalyst grids and ultra-supercritical (A-USC) power plant headers.

AWS Classification AWS A5.14 ERNiCrCoMo-1
EN / ISO Classification EN ISO 18274 S Ni 6617 (NiCr22Co12Mo9)
UNS / Werkstoff Nr. UNS N06617 / 2.4627 (Base Metal: 2.4663)
Welding Processes GTAW (TIG), GMAW (Pulsed / Spray MIG)

Alloy Identification, Standards & Supply Specifications

Because Inconel 617 contains 0.8–1.5% Aluminum, meticulous inter-pass wire brushing (using dedicated stainless steel brushes) and inert gas shielding are required to remove thin refractory aluminum oxide films between passes.

Technical Product Specification Summary — Inconel 617 Filler Wire
Product Designation Inconel 617 Filler Wire (TIG Welding Rod / MIG Spooled Wire)
AWS / ASME Classification AWS A5.14 ERNiCrCoMo-1
EN / ISO Classification EN ISO 18274 S Ni 6617 (NiCr22Co12Mo9)
UNS Designation & Werkstoff Nr. UNS N06617 • W.Nr. 2.4627 (Base Metal: 2.4663)
Compatible Base Materials Inconel 617 (UNS N06617), Incoloy 800H / 800HT (N08810 / N08811), Inconel 600 / 601, Haynes 230 (dissimilar), and cast heat-resistant alloys (HP-Mod, HK-40) in furnace and turbine service.
Supported Welding Processes GTAW (TIG), GMAW (Pulsed / Spray MIG)
Shielding Gas Recommendations 100% Argon or Ar + He (GTAW); Ar + He (Pulsed GMAW)
Available Wire Diameters MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16")
TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm
Packaging & Storage TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons.
MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film.
Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging.

Chemical Composition Specification (AWS A5.14 ERNiCrCoMo-1)

The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:

Chemical Composition Limits — Inconel 617 Filler Wire
Element Verified Specification Limit (wt.%) Metallurgical Function in Weld Metal
Nickel (Ni) 44.5 min (Balance ~52%) Stable high-temperature austenitic base matrix
Chromium (Cr) 20.0 – 24.0 Primary oxidation, sulfidation and hot-gas corrosion barrier
Cobalt (Co) 10.0 – 15.0 Solid-solution strengthening and creep-rupture stability >850°C
Molybdenum (Mo) 8.0 – 10.0 Matrix strengthening and creep resistance at extreme temperatures
Aluminum (Al) 0.80 – 1.50 Forms protective Al2O3 subscale against oxidation and carburization
Carbon (C) 0.05 – 0.15 Controlled carbon forms stable carbides for high-temperature creep strength
Iron (Fe) 3.0 max Controlled low iron
Manganese (Mn) & Silicon (Si) Mn ≤ 1.0, Si ≤ 1.0 Deoxidation and fluidity control
Titanium (Ti) & Copper (Cu) Ti ≤ 0.60, Cu ≤ 0.50 Minor stabilizing and residual limits
Sulfur (S) 0.015 max Strictly controlled to prevent grain-boundary embrittlement

Mechanical & Physical Properties

The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:

Mechanical & Physical Property Reference — Inconel 617 Filler Wire
Property Value Unit Specification / Reference Basis
Tensile Strength ≥ 620 (Typical: 750 – 810) MPa AWS A5.14 Minimum / Typical All-Weld-Metal
Yield Strength (0.2% Offset) ≥ 400 (Typical: 470 – 520) MPa Typical As-Welded GTAW Deposit
Elongation ≥ 25 (Typical: 32 – 38) % AWS A5.14 Minimum in 4D
Density 8.36 g/cm³ Physical Property Reference
Melting Range 1330 – 1380 °C Physical Property Reference
Technical Verification Statement: Standard limits above reflect published AWS / ASME / EN ISO classification specifications and typical deposited weld metal properties. Actual heat-specific test results depend on wire diameter, batch chemistry and welding procedure parameters. Contact us for confirmed product specifications and available technical documentation.

Corrosion Resistance, Welding Considerations & Industrial Applications

Inconel 617 filler wire resists cyclic oxidation, carburization, metal dusting and nitriding at temperatures up to 1100°C. Use low-to-moderate heat input, stringer beads, extended gas post-flow to protect the hot tungsten electrode and weld crater from oxidation, and brush any surface oxide film clean between passes.

Typical Industrial Applications

  • Gas turbine combustion cans, transition ducts and exhaust liners in power and aviation turbines
  • Ethylene pyrolysis furnace coils, transfer line exchangers (TLE) and steam methane reformer headers/pigtails
  • Nitric acid plant catalyst support grids and high-temperature heat exchangers
  • Industrial heat-treating furnaces, radiant tubes, muffles and strand annealing lines
  • Joining Incoloy 800HT where higher weld metal creep strength than ERNiCr-3 (Inconel 82) is required (>800°C)

International Enquiry Destinations

FillerWires welcomes B2B export enquiries for Inconel 617 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:

International Enquiry Destinations for Inconel 617 Filler Wire
Target Country Relevant Industrial Cities & Ports Typical Regional Sector Demand
Saudi Arabia Jubail, Yanbu, Dammam, Riyadh Ethylene crackers, methanol/ammonia reformers & gas turbines
Qatar & Bahrain Ras Laffan, Mesaieed, Doha, Manama, Sitra Gas-to-Liquids (GTL), LNG power turbines &アルミ/refining furnaces
United Arab Emirates & Oman Abu Dhabi, Ruwais, Dubai, Sohar, Duqm Petrochemical pyrolysis furnaces & power generation
United States & United Kingdom Houston, Greenville/Atlanta, Cincinnati, Derby, Aberdeen, Sheffield Gas turbine manufacturing, aerospace & petrochemical furnaces
Germany, Italy & Netherlands Mülheim/Essen, Düsseldorf, Milan, Turin, Genoa, Rotterdam Turbine engineering, reformer manifolds & furnace fabrication
Singapore, South Africa & Peru Jurong Island, Secunda/Johannesburg, Lima, Talara Refinery heaters, synfuel reformers & power plants

Frequently Asked Questions — Inconel 617 Filler Wire

Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Inconel 617 Filler Wire:

Inconel 617 Filler Wire is classified under AWS A5.14 ERNiCrCoMo-1 and EN ISO 18274 S Ni 6617 (NiCr22Co12Mo9) (UNS UNS N06617, Werkstoff Nr. 2.4627 (Base Metal: 2.4663)). Contact us for confirmed product specifications and available technical documentation.

Inconel 617 Filler Wire (AWS A5.14 ERNiCrCoMo-1) is engineered for welding Inconel 617 (UNS N06617), Incoloy 800H / 800HT (N08810 / N08811), Inconel 600 / 601, Haynes 230 (dissimilar), and cast heat-resistant alloys (HP-Mod, HK-40) in furnace and turbine service.

Inconel 617 Filler Wire is supplied for GTAW (TIG), GMAW (Pulsed / Spray MIG) as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon or Ar + He (GTAW); Ar + He (Pulsed GMAW).

Inconel 617 filler wire resists cyclic oxidation, carburization, metal dusting and nitriding at temperatures up to 1100&deg;C. Use low-to-moderate heat input, stringer beads, extended gas post-flow to protect the hot tungsten electrode and weld crater from oxidation, and brush any surface oxide film clean between passes. Typical applications include: Gas turbine combustion cans, transition ducts and exhaust liners in power and aviation turbines; Ethylene pyrolysis furnace coils, transfer line exchangers (TLE) and steam methane reformer headers/pigtails; Nitric acid plant catalyst support grids and high-temperature heat exchangers.

Direct Export & Procurement Desk

International B2B Technical Enquiry & Quotation Request

Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.

Section A – Contact Information
Section B – Product Requirements
Multiple grades accepted. If unsure of the exact classification, enter “Not sure – Need technical assistance”.
Section C – Quantity Requirements
Section D – Technical and Project Details
To share technical specifications or supporting documents, please email info@fillerwires.com directly.
Direct Email: info@fillerwires.com | Tel/WhatsApp: +91 7045 212 326

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.