Cupro Nickel 90/10 Filler Wire Supplier — Copper Nickel 90/10 Welding Wire
Copper-Nickel 90/10 (CuNi10Fe1Mn / UNS C70600 type) TIG welding rods and MIG spooled wires engineered for marine engineering, shipboard seawater cooling lines, offshore firewater piping and hull cladding.
90% Copper / 10% Nickel Welding Consumables for Marine Seawater Piping & Cladding
Cupro Nickel 90/10 Filler Wire (nominal 88% Cu – 10% Ni – 1.4% Fe – 0.8% Mn with titanium deoxidizer) is engineered for welding 90/10 copper-nickel (UNS C70600 / W.Nr. 2.0872 / CW352H) seawater piping, condenser shells, desalination evaporators and boat hulls where welding procedures specify a matching 90/10 deposit composition or where 90/10 wire is used for anti-biofouling weld overlay cladding.
In addition to matching 90/10 composition wire, international marine standards (such as AWS A5.7) also frequently specify 70/30 ERCuNi filler wire for joining 90/10 base metal to provide a cathodic over-matching weld seam. FillerWires supplies both matching 90/10 CuNi filler wire and 70/30 ERCuNi filler wire to meet your exact project WPS.
Alloy Identification, Standards & Supply Specifications
Controlled iron (1.0–1.8% Fe) in 90/10 copper-nickel is dissolved in solid solution to provide optimal impingement resistance in flowing seawater up to 3.5 m/s, while titanium deoxidizers ensure sound, porosity-free welds.
| Product Designation | Cupro Nickel 90/10 Filler Wire (TIG Welding Rod / MIG Spooled Wire) |
|---|---|
| AWS / ASME Classification | EN ISO 24373 S Cu 7061 / Matching UNS C70600 (or AWS A5.7 ERCuNi) |
| EN / ISO Classification | EN ISO 24373 S Cu 7061 (CuNi10Fe1MnTi) |
| UNS Designation & Werkstoff Nr. | UNS C70600 / C70620 Series • W.Nr. 2.0872 (CW352H) |
| Compatible Base Materials | Copper-Nickel 90/10 (UNS C70600 / EEMUA 144 / DIN 86019 / CW352H) seamless and welded seawater pipes, fittings, flanges and marine hull plates. |
| Supported Welding Processes | GTAW (TIG), GMAW (MIG) |
| Shielding Gas Recommendations | 100% Argon or Argon + Helium |
| Available Wire Diameters | MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16") TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm |
| Packaging & Storage | TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons. MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film. Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging. |
Chemical Composition Specification (EN ISO 24373 S Cu 7061 / Matching UNS C70600 (or AWS A5.7 ERCuNi))
The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:
| Element | Verified Specification Limit (wt.%) | Metallurgical Function in Weld Metal |
|---|---|---|
| Copper (Cu) | Remainder (~86 – 88%) | Provides high thermal conductivity and anti-biofouling marine resistance |
| Nickel + Cobalt (Ni+Co) | 9.0 – 11.0 | Enhances corrosion resistance and strength in seawater |
| Iron (Fe) | 1.0 – 1.8 | Critical addition providing impingement and erosion-corrosion resistance |
| Manganese (Mn) | 0.50 – 1.00 | Deoxidizer and sulfur binder |
| Titanium (Ti) | 0.15 – 0.50 (Welding Grade) | Prevents oxygen/nitrogen porosity in the molten weld pool |
| Lead (Pb) | 0.02 max | Strictly restricted to prevent hot cracking |
| Phosphorus (P) & Sulfur (S) | P ≤ 0.020, S ≤ 0.020 | Low impurity limits for weld soundness |
| Carbon (C) | 0.05 max | Controlled carbon limit for welding grade |
Mechanical & Physical Properties
The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:
| Property | Value | Unit | Specification / Reference Basis |
|---|---|---|---|
| Tensile Strength | ≥ 275 (Typical: 300 – 340) | MPa | Typical As-Welded 90/10 Deposit (≥345 MPa with ERCuNi) |
| Yield Strength (0.2% Offset) | ≥ 105 (Typical: 125 – 155) | MPa | Typical As-Welded GTAW Deposit |
| Elongation | ≥ 30 (Typical: 34) | % | In 50 mm Gauge Length |
| Density | 8.94 | g/cm³ | Physical Property Reference |
| Melting Range | 1100 – 1145 | °C | Physical Property Reference |
Corrosion Resistance, Welding Considerations & Industrial Applications
Cupro Nickel 90/10 is the workhorse alloy for offshore platform firewater, seawater cooling and ballast systems (such as EEMUA 144 / 234 piping specifications). When welding 90/10 pipe, ensure thorough degreasing, use pure Argon back-purging for full-penetration GTAW root runs, and avoid weave beads wider than 2.5 times the electrode diameter.
Typical Industrial Applications
- Offshore oil & gas topside seawater cooling and Deluge firewater piping (EEMUA 144 / UNS C70600)
- Shipboard engine-room cooling water, bilge, ballast and sanitary seawater lines
- Multi-Stage Flash (MSF) and MED desalination heat recovery and condenser tubing/waterboxes
- Aquaculture cages, workboat hulls and offshore wind turbine splash-zone protection
- Power station steam surface condensers and auxiliary heat exchangers
International Enquiry Destinations
FillerWires welcomes B2B export enquiries for Cupro Nickel 90/10 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:
| Target Country | Relevant Industrial Cities & Ports | Typical Regional Sector Demand |
|---|---|---|
| United Arab Emirates & Oman | Abu Dhabi, Dubai, Sharjah, Fujairah, Muscat, Sohar, Duqm | Offshore topside firewater piping, desalination & shipyards |
| Saudi Arabia, Qatar & Kuwait | Dammam, Jubail, Jeddah, Doha, Ras Laffan, Shuwaikh, Shuaiba | Offshore platforms, LNG cooling & desalination plants |
| Bahrain, Singapore & Sri Lanka | Manama, Hidd, Jurong, Tuas, Pioneer, Colombo, Trincomalee | FPSO conversion, drydock shiprepair & marine piping |
| Italy, UK, Germany & Norway | Genoa, Venice, Trieste, Aberdeen, Southampton, Hamburg, Stavanger | Shipbuilding, North Sea offshore & marine condensers |
| United States, South Africa & Peru | Houston, New Orleans, San Diego, Durban, Cape Town, Callao, Ilo | Offshore production rigs & commercial/naval vessels |
Frequently Asked Questions — Cupro Nickel 90/10 Filler Wire
Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Cupro Nickel 90/10 Filler Wire:
Cupro Nickel 90/10 Filler Wire is classified under EN ISO 24373 S Cu 7061 / Matching UNS C70600 (or AWS A5.7 ERCuNi) and EN ISO 24373 S Cu 7061 (CuNi10Fe1MnTi) (UNS UNS C70600 / C70620 Series, Werkstoff Nr. 2.0872 (CW352H)). Contact us for confirmed product specifications and available technical documentation.
Cupro Nickel 90/10 Filler Wire (EN ISO 24373 S Cu 7061 / Matching UNS C70600 (or AWS A5.7 ERCuNi)) is engineered for welding Copper-Nickel 90/10 (UNS C70600 / EEMUA 144 / DIN 86019 / CW352H) seamless and welded seawater pipes, fittings, flanges and marine hull plates.
Cupro Nickel 90/10 Filler Wire is supplied for GTAW (TIG), GMAW (MIG) as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon or Argon + Helium.
Cupro Nickel 90/10 is the workhorse alloy for offshore platform firewater, seawater cooling and ballast systems (such as EEMUA 144 / 234 piping specifications). When welding 90/10 pipe, ensure thorough degreasing, use pure Argon back-purging for full-penetration GTAW root runs, and avoid weave beads wider than 2.5 times the electrode diameter. Typical applications include: Offshore oil & gas topside seawater cooling and Deluge firewater piping (EEMUA 144 / UNS C70600); Shipboard engine-room cooling water, bilge, ballast and sanitary seawater lines; Multi-Stage Flash (MSF) and MED desalination heat recovery and condenser tubing/waterboxes.
International B2B Technical Enquiry & Quotation Request
Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.