International Export Desk Welding Filler Wires & Alloy Consumables Supplier from India — A Venture of Creative Piping Solutions Pvt. Ltd.

Inconel 625 Filler Wire Supplier — AWS A5.14 ERNiCrMo-3 Welding Wire

High-strength Nickel-Chromium-Molybdenum-Niobium filler metal (AWS A5.14 ERNiCrMo-3 / UNS N06625) for offshore sour-gas weld overlay cladding, super-austenitic stainless welding and cryogenic-to-980°C service.

AWS A5.14 ERNiCrMo-3 UNS: UNS N06625 Werkstoff: 2.4856 / 2.4831 GTAW (TIG), GMAW (MIG / Pulsed), SAW, Hot-Wire TIG Cladding
Inconel 625 ERNiCrMo-3 welding filler wire spool
Inconel 625 (AWS A5.14 ERNiCrMo-3) precision layer-wound MIG spool and TIG filler wire.
Nickel Alloy Filler Wires

Industry-Standard ERNiCrMo-3 Filler Metal for Sour Service Cladding & High-Alloy Joining

Inconel 625 Filler Wire (AWS A5.14 ERNiCrMo-3 / Alloy 625 Filler Metal) is one of the most widely specified nickel-base welding consumables in international oil & gas, marine, chemical and power engineering. Its solid-solution matrix of nickel (~61%), chromium (21.5%), molybdenum (9%) and niobium (3.6%) delivers exceptional tensile strength and fatigue resistance from cryogenic temperatures (-196°C) up to 980°C without requiring precipitation heat treatment.

With a Pitting Resistance Equivalent Number (PREN = %Cr + 3.3×%Mo + 16×%N) exceeding 50, ERNiCrMo-3 is the benchmark consumable for automated GTAW/GMAW corrosion-resistant weld overlay (CRA cladding) on carbon and low-alloy steel subsea Christmas trees, valves, risers and pressure vessels, as well as over-matching welds on 6% Mo super-austenitic stainless steels (such as 254 SMO / UNS S31254 and AL-6XN).

AWS Classification AWS A5.14 ERNiCrMo-3
EN / ISO Classification EN ISO 18274 S Ni 6625 (NiCr22Mo9Nb)
UNS / Werkstoff Nr. UNS N06625 / 2.4856 / 2.4831
Welding Processes GTAW (TIG), GMAW (MIG / Pulsed), SAW, Hot-Wire TIG Cladding

Alloy Identification, Standards & Supply Specifications

Niobium and molybdenum stiffen the nickel-chromium matrix directly in the as-welded state while providing outstanding resistance to chloride pitting, crevice corrosion and H2S/CO2 sour-gas stress-corrosion cracking.

Technical Product Specification Summary — Inconel 625 Filler Wire
Product Designation Inconel 625 Filler Wire (TIG Welding Rod / MIG Spooled Wire)
AWS / ASME Classification AWS A5.14 ERNiCrMo-3
EN / ISO Classification EN ISO 18274 S Ni 6625 (NiCr22Mo9Nb)
UNS Designation & Werkstoff Nr. UNS N06625 • W.Nr. 2.4856 / 2.4831
Compatible Base Materials Alloy 625 (UNS N06625), Alloy 825 (UNS N08825), 6% Mo super-austenitic stainless steels (UNS S31254, N08367, N08926), 9% Ni cryogenic steels, and dissimilar joints or CRA overlays onto carbon/low-alloy steels (AISI 4130, F22, X65).
Supported Welding Processes GTAW (TIG), GMAW (MIG / Pulsed), SAW, Hot-Wire TIG Cladding
Shielding Gas Recommendations 100% Argon or Ar + He (GTAW); Ar + 25–30% He (Pulsed GMAW)
Available Wire Diameters MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16")
TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm
Packaging & Storage TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons.
MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film.
Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging.

Chemical Composition Specification (AWS A5.14 ERNiCrMo-3)

The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:

Chemical Composition Limits — Inconel 625 Filler Wire
Element Verified Specification Limit (wt.%) Metallurgical Function in Weld Metal
Nickel (Ni) 58.0 min (Typical: 61–64) Austenitic matrix immune to chloride stress-corrosion cracking
Chromium (Cr) 20.0 – 23.0 Passivation against oxidizing media and high-temperature sulfidation
Molybdenum (Mo) 8.0 – 10.0 High resistance to localized chloride pitting and crevice attack
Niobium + Tantalum (Nb+Ta) 3.15 – 4.15 Solid-solution strengthening and stabilization against sensitization
Iron (Fe) 5.0 max (Often <1.0% for low-dilution overlays) Controlled low iron supports single/two-layer CRA cladding compliance
Carbon (C) 0.10 max (Typical: ≤0.03) Low carbon maintains ductility and intergranular corrosion resistance
Manganese (Mn) 0.50 max Deoxidation and sulfur control
Silicon (Si) 0.50 max Restricted to prevent silicate film formation and microfissuring
Aluminum (Al) & Titanium (Ti) Al ≤ 0.40, Ti ≤ 0.40 Deoxidizers
Phosphorus (P) & Sulfur (S) P ≤ 0.020, S ≤ 0.015 Strict impurity limits for crack-free multi-pass welds

Mechanical & Physical Properties

The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:

Mechanical & Physical Property Reference — Inconel 625 Filler Wire
Property Value Unit Specification / Reference Basis
Tensile Strength ≥ 760 (Typical: 785 – 830) MPa AWS A5.14 Minimum / Typical All-Weld-Metal
Yield Strength (0.2% Offset) ≥ 450 (Typical: 480 – 540) MPa Typical As-Welded GTAW/GMAW Deposit
Elongation ≥ 30 (Typical: 34 – 40) % AWS A5.14 Minimum in 4D
Charpy V-Notch Impact (-196°C) ≥ 70 J Typical Cryogenic Weld Metal Toughness
Density 8.44 g/cm³ Physical Property Reference
Melting Range 1290 – 1350 °C Physical Property Reference
Technical Verification Statement: Standard limits above reflect published AWS / ASME / EN ISO classification specifications and typical deposited weld metal properties. Actual heat-specific test results depend on wire diameter, batch chemistry and welding procedure parameters. Contact us for confirmed product specifications and available technical documentation.

Corrosion Resistance, Welding Considerations & Industrial Applications

Inconel 625 filler wire resists seawater pitting, stagnant marine crevice attack, sour gas (H2S + chlorides + elemental sulfur), nitric-hydrofluoric pickling solutions and flue gas condensates. When cladding carbon steel (e.g., API 6A / NACE MR0175 / ISO 15156 applications where <5% or <10% Fe is required at the finished overlay surface), control arc energy and overlap step-over to limit base metal iron dilution.

Typical Industrial Applications

  • Automated GTAW (hot-wire TIG) and pulsed GMAW CRA weld overlay cladding of oil & gas valves, flanges, subsea manifolds and risers
  • Welding 6% Mo super-austenitic stainless steel desalination high-pressure SWRO piping and seawater cooling networks
  • Joining 9% Nickel cryogenic LNG storage tanks and liquefied gas transfer lines
  • Offshore exhaust systems, flare tips, bellows expansion joints and marine propellers
  • Dissimilar welding between nickel alloys, stainless steels and carbon/low-alloy steels

International Enquiry Destinations

FillerWires welcomes B2B export enquiries for Inconel 625 Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:

International Enquiry Destinations for Inconel 625 Filler Wire
Target Country Relevant Industrial Cities & Ports Typical Regional Sector Demand
United Arab Emirates Abu Dhabi, Dubai, Jebel Ali, Sharjah, Fujairah Offshore oilfield CRA weld overlay cladding & shipyards
Saudi Arabia Dammam, Jubail, Khobar, Dhahran, Yanbu Sour gas manifold cladding, refining & desalination
Qatar Doha, Ras Laffan, Mesaieed LNG cryogenic piping & offshore North Field platforms
Oman, Kuwait & Bahrain Muscat, Sohar, Duqm, Ahmadi, Shuaiba, Manama, Hidd Refinery vessels, wellhead cladding & seawater piping
United States & United Kingdom Houston, New Orleans, Pittsburgh, Aberdeen, Sheffield, Glasgow Subsea trees, blowout preventers & North Sea offshore
Norway, Italy & Germany Stavanger, Bergen, Milan, Genoa, Hamburg, Düsseldorf Subsea engineering, pressure vessels & heat exchangers
Singapore, South Africa & Peru Jurong, Tuas, Pioneer, Johannesburg, Durban, Lima, Callao FPSO topside modules & chemical processing

Frequently Asked Questions — Inconel 625 Filler Wire

Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Inconel 625 Filler Wire:

Inconel 625 Filler Wire is classified under AWS A5.14 ERNiCrMo-3 and EN ISO 18274 S Ni 6625 (NiCr22Mo9Nb) (UNS UNS N06625, Werkstoff Nr. 2.4856 / 2.4831). Contact us for confirmed product specifications and available technical documentation.

Inconel 625 Filler Wire (AWS A5.14 ERNiCrMo-3) is engineered for welding Alloy 625 (UNS N06625), Alloy 825 (UNS N08825), 6% Mo super-austenitic stainless steels (UNS S31254, N08367, N08926), 9% Ni cryogenic steels, and dissimilar joints or CRA overlays onto carbon/low-alloy steels (AISI 4130, F22, X65).

Inconel 625 Filler Wire is supplied for GTAW (TIG), GMAW (MIG / Pulsed), SAW, Hot-Wire TIG Cladding as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon or Ar + He (GTAW); Ar + 25–30% He (Pulsed GMAW).

Inconel 625 filler wire resists seawater pitting, stagnant marine crevice attack, sour gas (H2S + chlorides + elemental sulfur), nitric-hydrofluoric pickling solutions and flue gas condensates. When cladding carbon steel (e.g., API 6A / NACE MR0175 / ISO 15156 applications where <5% or <10% Fe is required at the finished overlay surface), control arc energy and overlap step-over to limit base metal iron dilution. Typical applications include: Automated GTAW (hot-wire TIG) and pulsed GMAW CRA weld overlay cladding of oil & gas valves, flanges, subsea manifolds and risers; Welding 6% Mo super-austenitic stainless steel desalination high-pressure SWRO piping and seawater cooling networks; Joining 9% Nickel cryogenic LNG storage tanks and liquefied gas transfer lines.

Direct Export & Procurement Desk

International B2B Technical Enquiry & Quotation Request

Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.

Section A – Contact Information
Section B – Product Requirements
Multiple grades accepted. If unsure of the exact classification, enter “Not sure – Need technical assistance”.
Section C – Quantity Requirements
Section D – Technical and Project Details
To share technical specifications or supporting documents, please email info@fillerwires.com directly.
Direct Email: info@fillerwires.com | Tel/WhatsApp: +91 7045 212 326

Ready to Source Certified Welding Filler Wires for Your Next Project?

Connect with our international export team in Mumbai for technical datasheets, alloy availability, packaging options and competitive CIF/FOB quotations for the Middle East, GCC, USA, UK, Europe and global markets.