Stainless Steel ER316L Filler Wire Supplier — AWS A5.9 ER316L TIG & MIG Wire
Molybdenum-bearing (2.0–3.0% Mo) low-carbon 18Cr-12Ni-2.5Mo stainless steel filler wire (AWS A5.9 ER316L / UNS S31683) engineered for chloride pitting and crevice corrosion resistance in 316 and 316L equipment.
Molybdenum-Alloyed Low-Carbon 316L Filler Wire for Chloride & Acid Process Service
Stainless Steel ER316L Filler Wire (classified under AWS A5.9 ER316L and EN ISO 14343-A 19 12 3 L) is the most widely specified corrosion-resistant stainless steel welding wire for chemical processing, marine engineering, desalination, oil & gas instrumentation and pharmaceutical fabrication. Containing 2.0% to 3.0% Molybdenum and a maximum carbon content of 0.03%, ER316L delivers substantially higher resistance to localized chloride pitting, crevice attack and sulfuric/phosphoric/acetic acid corrosion than ER308L.
Low carbon (≤0.03% C) prevents grain-boundary chromium carbide precipitation in the weld deposit, while controlled delta-ferrite (typically 4–10 FN) ensures immunity to hot solidification cracking during both manual GTAW root runs and automated GMAW fill passes.
Alloy Identification, Standards & Supply Specifications
Available in standard silicon (ER316L: 0.30–0.65% Si) and high-silicon (ER316LSi: 0.65–1.00% Si) grades for enhanced puddle wetting in MIG welding.
| Product Designation | Stainless Steel ER316L Filler Wire (TIG Welding Rod / MIG Spooled Wire) |
|---|---|
| AWS / ASME Classification | AWS A5.9 / ASME SFA-5.9 ER316L |
| EN / ISO Classification | EN ISO 14343-A W/G 19 12 3 L (W.Nr. 1.4430) |
| UNS Designation & Werkstoff Nr. | UNS S31683 • W.Nr. 1.4430 |
| Compatible Base Materials | AISI 316, 316L, 316LN, 316Ti, 316Cb (UNS S31600, S31603, S31653, S31635), ASTM A240 / A312 TP316/TP316L, and CF3M / CF8M stainless steel castings. |
| Supported Welding Processes | GTAW (TIG), GMAW (MIG), SAW |
| Shielding Gas Recommendations | 100% Argon (GTAW); Ar + 1–2% O2 or Ar + 2% CO2 (GMAW) |
| Available Wire Diameters | MIG Spools: 0.8mm (.030"), 0.9mm (.035"), 1.0mm (.040"), 1.2mm (.045"), 1.6mm (1/16") TIG Cut-Length Rods: 1.2mm, 1.6mm (1/16"), 2.0mm, 2.4mm (3/32"), 3.2mm (1/8"), 4.0mm (5/32") × 914mm (36") / 1000mm |
| Packaging & Storage | TIG Rods: 5 kg / 10 kg moisture-resistant tubular plastic packs in export master cartons. MIG Wire: 12.5 kg / 15 kg precision layer-wound BS300 / S200 spools sealed in VCI polyethylene film. Storage: Store in a dry, temperature-controlled indoor store (+10°C to +40°C, <60% RH) in original sealed packaging. |
Chemical Composition Specification (AWS A5.9 / ASME SFA-5.9 ER316L)
The table below specifies the standard wire chemical composition limits in weight percent (wt.%). Single values represent maximum permissible limits unless stated otherwise:
| Element | Verified Specification Limit (wt.%) | Metallurgical Function in Weld Metal |
|---|---|---|
| Carbon (C) | 0.03 max | Prevents intergranular sensitization without post-weld heat treatment |
| Chromium (Cr) | 18.0 – 20.0 | Primary passivating element against oxidizing environments |
| Nickel (Ni) | 11.0 – 14.0 | Balances higher Cr+Mo to maintain an austenitic-ferritic structure |
| Molybdenum (Mo) | 2.0 – 3.0 | Elevates PREN to resist chloride pitting, crevice and acid attack |
| Manganese (Mn) | 1.0 – 2.5 | Deoxidizer and hot-cracking inhibitor |
| Silicon (Si) | 0.30 – 0.65 (ER316LSi: 0.65–1.00) | Arc stability and weld pool fluidity |
| Copper (Cu) | 0.75 max | Residual limit per AWS A5.9 |
| Phosphorus (P) & Sulfur (S) | P ≤ 0.030, S ≤ 0.030 | Strict impurity limits for sound multi-pass welds |
| Iron (Fe) | Remainder | Matrix balance |
Mechanical & Physical Properties
The values below distinguish between minimum AWS/ISO classification requirements for all-weld-metal test assemblies and typical as-welded deposited weld metal benchmarks:
| Property | Value | Unit | Specification / Reference Basis |
|---|---|---|---|
| Tensile Strength | ≥ 510 (Typical: 560 – 610) | MPa | Typical All-Weld-Metal Deposit (AWS A5.9 / ISO 14343) |
| Yield Strength (0.2% Offset) | ≥ 350 (Typical: 390 – 430) | MPa | Typical As-Welded GTAW/GMAW Deposit |
| Elongation | ≥ 30 (Typical: 36 – 42) | % | In 5D / 50 mm Gauge Length |
| Charpy V-Notch Impact (-196°C) | ≥ 47 (Typical: 55 – 80) | J | Typical GTAW Deposit |
| Ferrite Number (FN) | 4 – 10 | FN | Typical WRC-1992 Range |
| Density | 7.98 | g/cm³ | Physical Property Reference |
Corrosion Resistance, Welding Considerations & Industrial Applications
ER316L filler wire performs reliably in coastal/marine atmospheres, brackish water, low-pressure RO desalination piping, pulp and paper digesters, pharmaceutical bioreactors and petrochemical process piping. Maintain interpass temperature below 150°C (300°F), avoid carbon steel contamination, and pickle/passivate heat-tinted weld zones where maximum chloride pitting resistance is required.
Typical Industrial Applications
- Chemical and petrochemical process piping, columns, reactors and shell-and-tube heat exchangers
- Desalination pretreatment piping, brackish water filtration vessels and marine deck hardware
- Pharmaceutical, biotech and semiconductor high-purity process tubing (orbital & manual GTAW)
- Oil & gas topside instrumentation tubing, chemical injection skids and offshore utility lines
- Pulp & paper, textile dyeing and food/sauce processing equipment containing chlorides
International Enquiry Destinations
FillerWires welcomes B2B export enquiries for Stainless Steel ER316L Filler Wire from EPC contractors, process equipment fabricators, shipyards and distributors across the following priority countries and industrial cities:
| Target Country | Relevant Industrial Cities & Ports | Typical Regional Sector Demand |
|---|---|---|
| United Arab Emirates | Dubai, Abu Dhabi, Sharjah, Jebel Ali, Fujairah, Ras Al Khaimah | Desalination skids, offshore utility piping & process vessels |
| Oman & Saudi Arabia | Muscat, Sohar, Duqm, Salalah, Dammam, Jubail, Yanbu, Jeddah | Refinery piping, SWRO desalination & chemical tanks |
| Qatar, Kuwait & Bahrain | Doha, Ras Laffan, Mesaieed, Kuwait City, Ahmadi, Manama, Hidd | LNG process utility piping & coastal fabrication |
| United States & United Kingdom | Houston, Philadelphia, Chicago, Los Angeles, Aberdeen, Birmingham, Bristol | Pharmaceutical, chemical & offshore fabrication |
| Italy, Germany & Netherlands | Milan, Turin, Genoa, Bologna, Hamburg, Düsseldorf, Rotterdam | PED pressure vessels, heat exchangers & marine equipment |
| Singapore, Sri Lanka, South Africa & Peru | Jurong, Tuas, Colombo, Trincomalee, Johannesburg, Durban, Lima, Callao | Marine, mining, food & chemical process fabrication |
Frequently Asked Questions — Stainless Steel ER316L Filler Wire
Technical questions and answers regarding classification, base metal compatibility, welding parameters and procurement for Stainless Steel ER316L Filler Wire:
Stainless Steel ER316L Filler Wire is classified under AWS A5.9 / ASME SFA-5.9 ER316L and EN ISO 14343-A W/G 19 12 3 L (W.Nr. 1.4430) (UNS UNS S31683, Werkstoff Nr. 1.4430). Contact us for confirmed product specifications and available technical documentation.
Stainless Steel ER316L Filler Wire (AWS A5.9 / ASME SFA-5.9 ER316L) is engineered for welding AISI 316, 316L, 316LN, 316Ti, 316Cb (UNS S31600, S31603, S31653, S31635), ASTM A240 / A312 TP316/TP316L, and CF3M / CF8M stainless steel castings.
Stainless Steel ER316L Filler Wire is supplied for GTAW (TIG), GMAW (MIG), SAW as precision layer-wound MIG spools (0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.6mm) and straight cut-length TIG rods (1.2mm, 1.6mm, 2.0mm, 2.4mm, 3.2mm, 4.0mm in 914mm / 36-inch and 1000mm lengths). Recommended shielding gas: 100% Argon (GTAW); Ar + 1–2% O2 or Ar + 2% CO2 (GMAW).
ER316L filler wire performs reliably in coastal/marine atmospheres, brackish water, low-pressure RO desalination piping, pulp and paper digesters, pharmaceutical bioreactors and petrochemical process piping. Maintain interpass temperature below 150°C (300°F), avoid carbon steel contamination, and pickle/passivate heat-tinted weld zones where maximum chloride pitting resistance is required. Typical applications include: Chemical and petrochemical process piping, columns, reactors and shell-and-tube heat exchangers; Desalination pretreatment piping, brackish water filtration vessels and marine deck hardware; Pharmaceutical, biotech and semiconductor high-purity process tubing (orbital & manual GTAW).
International B2B Technical Enquiry & Quotation Request
Submit your alloy grade, AWS/ISO classification, diameter, welding process and delivery destination. Our technical export team in Mumbai responds to enquiries from the Middle East, GCC, USA, UK, Europe, Singapore, Sri Lanka, South Africa, Peru and global markets.